Ultrasonic Level Transmitter Microflex D
The Microflex D from Hycontrol is a compact, non-intrusive, loop-powered ultrasonic level transmitter for continuous measurement of liquids. Microflex D does not compromise on quality and provides effortless and intuitive operation together with easy and flexible mounting.
Reply within one working day · Mon-Fri 9:00–18:00 · Shah Alam
Microflex D’s high chemical compatibility and measuring range of either 8 metres (Microflex D) or 12 metres (Microflex D ER) makes it appropriate for level indication applications in a wide range of industries such as water, waste, food, dairy, oil, chemicals and more.
The Microflex D emits an ultrasonic pulse which is reflected from the surface of the liquid being measured. The reflected signal is processed using specially developed software to enhance the correct signal and reject false echoes. An automatic sensitivity control allows the unit to dynamically adjust and improve the received echoes to achieve the best possible liquid measurement accuracy.
Since it’s introduction, the Microflex D has been used in dozens of different applications and has proven itself to be a robust, effective addition to Hycontrol’s product range. For straightforward liquid level indication and control applications, it is hard to beat!
- Two-wire 4-20 mA with HART connectivity
- Simple programming via built-in LCD display
- Ranges of up to 12 metres (40 ft)
- Non-contact measurement
- Low overall cost of ownership
- Ingress protection class IP67, NEMA 4x
- Adaptive sensitivity control
- Volume linearization with 32-point table
- Automatic temperature compensation
- Chemical-resistant PVDF transducer
- Simple installation
Microflex D technical data
- Maximum range: 8 m (Microflex D, versions DB with a 2 inch BSPT thread and DN with a 2 inch NPT thread) or 12 m (Microflex D ER)
- Accuracy: +/- 0.5 % of the maximum range (8 m versions) or +/- 0.25 % (12 m versions); resolution 1 mm
- Blanking distance 250 mm; maximum nozzle height 100 mm
- Operating temperature -40 to 60 °C; operating pressure -0.5 to 3 bar
- Supply 7 to 28 V DC at the terminals; output 4 to 20 mA with HART
- Frequency 50 kHz, beam angle 7 degrees, automatic temperature compensation
- PVDF transducer, powder coated aluminium housing, 4 line graphic display, IP67, M20 cable glands, weight 1 kg
- Volume from preset vessel shapes or a 32 point linearisation table
Typical uses are tanks, sumps, wet wells, pump stations, water towers, diesel and fuel storage, chemical storage, slurry levels, inlet screens, and river, basin, dam and tide levels. Hycontrol shows the basic set-up and programming in a Microflex D video.
Related products
APM-2 Smart DP transmitter for pressure vessels
Capacitance Switch ME10 Standard
Guided Wave Radar TDR Reflex VF7 Liquids, Powders&Granules up to 35 m
The Reflex VF7 TDR microwave level control transmitter is ideal for the measurement of liquids, powders and granules up to a range of 35 m. The unit is unaffected by pressure, temperature, viscosity, vacuum, foam, dust, changes in dielectric constant or coating of the probe. VF7 can measure virtually any product in either Direct or TBF mode, utilising any one of the seven available probe types.
Magnetic Level Gauge Pointer R, In Line
The Hadro Magnetic Level Gauge Pointer R provides secure fluid tracking for unique in-line pipeline configurations. This model features two process connections positioned directly at the ends of the measuring chamber. Consequently, plant engineers install the entire indicator assembly straight between two separate pipeline segments. This setup creates a seamless, leak-free connection for active process lines. It tracks fluid levels continuously via an external indicator rail with red and white flaps, requiring zero electrical power to function.
SGE 25 Hydrostatic Level Probes
The Aplisens SGE series offers specialised hydrostatic level probes for liquid depth tracking. Measuring up to 500 m Hâ‚‚O, they convert liquid column height to precise readings using a piezoresistant silicon sensor behind an isolating diaphragm. The SGE-25 handles wells and tanks; the narrow SGE-16 fits tight piezometers.Built-in internal overvoltage protection shields against surge or atmospheric lightning damage. Certified with ATEX Intrinsic Safety, IECEx, UKEX, and DNV marine classification.
Smartfoam Sensor
The SmartFoam sensor is part of Hycontrol’s foam detection range, designed to detect and control foam in a single unit for basic foam applications. It is simple, robust and cost-effective. Within its head, the SmartFoam has its own built-in transmitter so that foam detection and control are managed without the need for an external controller. This integrated Sensor shows reliability, resilience, and complete immunity to fouling.
Ultrasonic Level Transmitter Multiflex
The Hycontrol Multiflex is a CE-marked ultrasonic level controller for solids in hoppers and silos and for liquids, with software routines selected for solid or liquid applications. It measures from 0 to 15 m with 0.25% accuracy, works from -40°C to +90°C, allows up to 300 metres between transducer and controller and has an ATEX option. Hycontrol now offers the Miniflex LR as its replacement.
Ultrasonic Level Transmitter Miniflex LR
Specifying something like this?
Range, medium, connection and temperature: that is all we need to quote it.