The Hycontrol Capacitance level sensors ME Series uses the same transmitter and sensor for all applications with adjustable sensitivity on the dielectric constant for simplified product selection, installation and maintenance. Mount it - wire it - forget it.

Regular calibration of the accuracy of pressure and temperature gauges and sensors is mandatory by the marine classification societies. The LR-Cal Marine Calibration Kits use easy to operate, robust and reliable calibrators. All components are housed in a waterproof and robust marine case.

Calibration Software for the mobile pressure calibrator LR-Cal LPC300 for online calibration, setting procedures and certification

The electric pump  LR-Cal LAP-P with 2 pressure points generates test and calibration pressures (for overpressure up to 25 bar and vacuum pressure up to -0.9 bar) for pressure comparison tests. Fine adjustment is performed manually with a very sensitive fine adjustment valve.

The portable pressure calibration kits LR-Cal LPP-KIT from Leitenberger come with a pressure source (test pump) and reference pressure gauge / calibrator in a portable case.

They allow a comfortable, efficient and very accurate testing, adjusting and calibrating of pressure measuring devices in the field, as well as in laboratories and workshops.

Hadro manufactures Magnetic level gauges with

• Reed or Microswitch
• Reedchain transmitter with 4-20 MA analog output
• Field-/Profibus or HART protocol
• Intrinsically safe (Exi) or flame/explosion proof (Exd)

The housing can be made of Aluminum or stainless steel with IP68 and LCD or optical display.

The SmartFoam IMA sensor from Hycontrol, UK is designed to detect and control a wide range of light to dense foams with a single foul-resistant probe. The Suresense+ Controller protects from overflow and blockage, prevents pollution and enables dosing of anti foam agents to reduce cost.

Leitenberger, Germany offers a wide variety of electronic pressure switches:

• 

  up to 4 switch contacts
• LED display, IO-Link
• freely configurable switching points & hysteresis delay function, Min/Max value data storage, scalable analog output signal
• Intrinsically safe (Exia for gas), PDVF pressure port
• stainless steel or ceramic sensor, flush models
• vacuum, low, high pressure up to 2200 bar
• for hygienic, medical, Oleo and Petro chemical, high viscosity, paint, HVAC, process engineering

more information on pressure switch models

Proven measurement technology leads to optimised foam control and reduced process costs Introduction. Exciting new technology developments in foam measurement and control are bringing important benefits to the waste water industry, as well as a wide range of other process industries. The accurate and reliable measurement of foam brings substantial savings to companies through the improved control of anti-foaming agents, improved process control, increased yield, reduced product loss and reduction in equipment failure.

Foam generated in anaerobic digestion can be a costly headache for AD producers and their insurers. In this article Sam Gould, Foam Technology Specialist at level measurement pioneers Hycontrol, discusses the problems uncontrolled foam can cause and how Hycontrol’s SureSense⁺ system can address them.