Smart IO Link interface solutions from Leitenberger for your automation system:

• Pressure Transmitter LPT 533-IO
• Electronic Pressure Switch LDS 350-IO
• Electronic Temperature Switch LTS 300-IO

IO-Link is a point-to-point connection that is used for both parameterization and measured value output. Simple networking with the master is possible by using the IODD file with a data transmission of 38,4 kbits/s.

Every material has a certain moisture. By knowing that moisture the production, the storage and the quality of this material can be optimized. ACO sensors determine the moisture of different materials in real-time. They are used in silos, conveyer belts, screw conveyers, etc. The moisture sensors are working with the capacity measuring principle. The surface of the sensor is directly in contact with the measured material. The ACO moisture sensors are:

• less affected by contamination, discoloration, particle size and temperature of the material
• designed to cope with the toughest application, longstanding, reliable reading
• adaptable to existing plants with little effort
• up to 16 sensors in 1 system

The Turbine Meter Series RQ from Bopp & Reuther Messtechnik for Oils, Acids, Solvents, Liquified Gases

• Accuracy better then ±0,15%
  
• Repeatability better than ±0,02%
  
• for high pressures and low viscosities
  
• Rim type rotor with higher pulse resolution
  
• Special designs (Cl. 2500, Hastelloy, Duplex, HART…)
  
• Extremely rugged design, suitable for LPG, bio fuels…
  
• Quality “made in Germany”
  
• Sustainability: decades of trouble free operation, easy to repair/maintain
• for Chemical - Petrochemical - Mineral Oil Industry - Loading Systems

What are the advantages of high accuracy oval gear flowmeters compared to Coriolis Mass Flow instruments?

Coriolis manufacturers often give the impression that their Mass Flow solution the only reliable high precision measurement technology for oil flow applications.

After comparing the specs and analyzing the facts we do disagree. In many cases Bopp & Reuther Oval Gear Flow Meters offer a better alternative comparing the reliability, profitibility, maintenance issues and the range of viscosity. Here an overview.

The KEP Supertrol 2 Flow Computer with XHVD Enclosure is suitable for Hazardous Areas with Class 1 Division 1 Groups B, C & D certification. The addition of Group B certification to the XHVD makes it suitable to be used with Hydrogen and other flammable gases, liquids and vapors.

Oval Gear Meters from Bopp & Reuther Messtechnik for high accuracy volume measurement of liquids and liquid gases in loading applications of the chemical and petrochemical industry, petroleum industry and of food and beverages:

• high accuracy and repeatibilty: fiscal/custody transfer
• reliable, long lasting, low maintenance
  
• low pressure drop, no drift, no inlet/outlet required
• compact, simple installation and commisioning
• Large range of metered liquids, wide viscosity range
  

The APIS positioner is a final control element for control valves. The positioner with a  pneumatic membrane and piston single and double-acting actuators with linear and rotational movement allows quick and precise control of the actuator piston rod using an analog or digital control signal.

Horizonal Valve Test Benches for testing of safety, shut-off and control valves - made by EFCO in Germany:

• robust construction, easy operation, modular design
  
• clamping forces up to 600 tons - infinitely adjustable
• clamping device parts coated to protect against corrosion
• automatic proportional control of the clamping force for gentle clamping of the test pieces during the test procedure
• opt. automatic drive
• opt. Valve-Doc software for logging, recording, analyzing

Aplisens developed flanged diaphragm seals with an inbuilt two channel cleaning system for highly viscous process liquids.

The cleaning medium is supplied to the membrane surface via two channels placed inside the diaphragm seal.

This process prevents the dismounting of the seals from the application process. The seals can be used for Aplisens pressure transmitters.