Smart IO Link interface solutions from Leitenberger for your automation system:

• Pressure Transmitter LPT 533-IO
• Electronic Pressure Switch LDS 350-IO
• Electronic Temperature Switch LTS 300-IO

IO-Link is a point-to-point connection that is used for both parameterization and measured value output. Simple networking with the master is possible by using the IODD file with a data transmission of 38,4 kbits/s.

Aplisens developed a differential pressure transmitter for level measurement in vacuum tanks based on 2 absolute pressure transmitters:

• Modular construction with possibility of replacing of each module of the measuring system
• Output signal 4 ÷ 20 mA + HART
• Accuracy 0,1%
• Intrinsically safe and ex-proof versions

The compact, portable and light-weight dry well (metal block) temperature calibrator Pyros series from Leitenberger is used for testing, calibration of temperature instruments: dial and digital thermometer, temperature probes and sensors.

The dry block calibrator is expecially designed for field applications, robust and able to maintain high accuracy and stability in severe conditions such as offshore rigs and on board of vessels. The innovative forced air ventilation reduces the cooling time and prevents the sensors under test being exposed to excessive heating.

Pressure Measurement for Technical Gases - Hydrogen - Fuel Cell- Medical Technology

• specially developed for Hydrogen applications
  
• insensitive to pressure peaks
  
• high overpressure capability
  
• oil and grease free according to ISO 15001, (e.g. for oxygen appl.)

Calibration Software for the mobile pressure calibrator LR-Cal LPC300 for online calibration, setting procedures and certification

The electric pump  LR-Cal LAP-P with 2 pressure points generates test and calibration pressures (for overpressure up to 25 bar and vacuum pressure up to -0.9 bar) for pressure comparison tests. Fine adjustment is performed manually with a very sensitive fine adjustment valve.

The portable pressure calibration kits LR-Cal LPP-KIT from Leitenberger come with a pressure source (test pump) and reference pressure gauge / calibrator in a portable case.

They allow a comfortable, efficient and very accurate testing, adjusting and calibrating of pressure measuring devices in the field, as well as in laboratories and workshops.

Leitenberger, Germany offers a wide variety of electronic pressure switches:

• 

  up to 4 switch contacts
• LED display, IO-Link
• freely configurable switching points & hysteresis delay function, Min/Max value data storage, scalable analog output signal
• Intrinsically safe (Exia for gas), PDVF pressure port
• stainless steel or ceramic sensor, flush models
• vacuum, low, high pressure up to 2200 bar
• for hygienic, medical, Oleo and Petro chemical, high viscosity, paint, HVAC, process engineering

more information on pressure switch models

Proven measurement technology leads to optimised foam control and reduced process costs Introduction. Exciting new technology developments in foam measurement and control are bringing important benefits to the waste water industry, as well as a wide range of other process industries. The accurate and reliable measurement of foam brings substantial savings to companies through the improved control of anti-foaming agents, improved process control, increased yield, reduced product loss and reduction in equipment failure.

A comprehensive ATEX certified multi-point TDR radar level measuring and data recording system installed by Hycontrol is providing invaluable stock management information for leading chemical distributors Caldic UK Ltd. The VF series Guided Wave Radar Transmitters are fitted to Caldic’s nineteen 55,000 litre bulk storage vessels, which are at the heart of their operation in Chesterfield.