Portable & stationary, vertical & horizontal or tilting, manual & automatic valve test benches for:

• shell/body tests (valve housing)
• valve seat leakage tests of spindle gland and shut off devices
• set pressure test of safety & shut off valves
• test pressure: water 1380 bar, air & nitrogen 300 bar, vacuum
• for gate, check, control, ball, safety, shut-off valves, etc.
• valve test procedure setting, analysis and docu system

watch video

A flow computer is a special purpose device which computes a corrected flow based on information derived from raw input signals and stored sensor and fluid properties information. KEP Flow Computers with inbuilt rate, total and batching functions are compatible with all flowmeter types and are ideal for metering energy consumption in Heated/Chilled Water and Steam applications.

Typical flow applications include computation of heat flow, mass flow, corrected volume flow, data logging, communication, remote metering, alarming and control functions, replacement of a small PLC functionality

For Testing and Calibration on site Time Electronics Asia offers Digital Pressure Gauges up to 2500 bar and Benchtop Pressure Calibration Pumps up to 600 bar with Software readback into the EasyCal Time Electronic software

Aplisens offers a wide range of Differential Pressure Transmitters solutions with a range from 0-2 mbar to 0-70 bar. The items are manufactured in Europe with high quality standards and the required certifications.

Valve test bench for testing of safety, shut-off and control valves

Size: DN 15 (1/2“) - DN 500 (20“)

Clamping Force: 15 - 70 tons

Proven technology standardised and in modular design.

Cost-effective and short delivery time.

Basic program with variants and many options.

The Smart Temperature Transmitter LI-24ALW is applicable to converting resistance of temperature or voltage of thermocouple sensor to standard current signal 4-20mA. The transmitter has two separate channels enabling measurement of temperature difference, average, average with redundancy, max. or min. temperature.

The EFCO product range comprises portable and stationary lathes and flange-facers, both CNC-controlled and conventional:

EFCO designs and produces machines and devices for the repair of valves

• Safety, Gate, Check, Ball Valves
• flat and conical seats
• sealing surfaces, disks, flanges, bores and pipes
• grinding and lapping
• cutting and turning
• portable and stationary devices

EFCO offers modern and advanced Grinding and Lapping Solutions. The product range includes portable and stationary valve-grinding and -lapping equipment for a great variety of applications: